As the oil press industry is getting hotter and hotter, more and more people invest in the oil pressing industry, and there are more and more oil pressing workshops. People saw the benefits of the oil extraction industry, and many people invested in the oil extraction industry. But many customers don’t know much about the types of oil presses. The following BTMA company will introduce to you the most popular types of seed oil presses in the market.
Spiral seed oil press is mostly used for hot pressing oil production. Under the action of high temperature and high pressure, it can not only separate the original peculiar smell in the oil to a large extent, such as the beany smell of soybeans, the pungent taste of erucic acid in rapeseed, but also fully Inspires aromas in the oil, such as the unique flavors of peanut and sesame.
 |
 |
BTMA company–6YL series automatic oil press features
1. Appearance innovation
In the past, the seed oil press equipment basically adopted a colorless design, and the whole body did not attract customers. The interior has now been retuned with a new and innovative design. In addition, the use of color increases the aesthetic feeling and makes the oil pressing equipment more delicate. And it is more convenient to disassemble and clean.
2. Function innovation
Improve equipment efficiency, adopt ergonomic design, innovate pressure rod, and the fixed structure between pressure chamber and engine is smaller, with faster efficiency and lower failure rate.
3. Material Innovation
Advanced technology also needs to be matched with good materials, and the use of high-quality materials can greatly extend the service life of the equipment. With the improvement of people’s health concept, the future development trend of seed oil press is expected. In short, the oil press industry has great potential for development and can bring high profit returns to buyers.
 |
 |
Oil pressing process of seed oil press machine
Before the oil is extracted, the oil will go through shelling, crushing, rolling, steaming and frying, etc. These processes are collectively referred to as the pretreatment of the oil.
In the pretreatment process, the oil husking rate, the degree of crushing, and whether the oil temperature and moisture are adjusted to the appropriate temperature during steaming and frying all have a certain impact on the oil yield.
We all know that some oil materials such as tea seeds and peanuts need to be shelled first and then crushed, steamed and fried. The shell of the oil does not contain oil, and it will affect the subsequent crushing, steaming and frying processes. Direct pressing will also have a certain impact on the quality of the oil. Therefore, it is necessary to dehull this part of the oil first, which can improve the efficiency of pressing or leaching, and improve the oil quality. Oil quality.
In the actual operation process, we also need to pay attention to the fact that due to the heat generated between the friction, it has a very good application for the thermal denaturation of the embryo protein and the plasticity of the colloid. In that case, in the actual operation process, we can well squeeze out the oil in the raw materials for oil extraction. Then it flows out through the gaps of the round row and the row of rows, and we can get the oil in it very well. For the oil dirt of the seed oil press, we can solve it well after we have a good understanding of its production structure.
