Rapeseed oil refining machine
Rapeseed oil refining machine is a processing product that removes impurities and sediments in rapeseed oil to make it meet the edible standards. Canola oil refining equipment, which is composed of a decolorizing pot, deacidizing pot, spiral separator, spiral separator, vacuum filter, etc. Decolorization: According to the amount of impurities and sediment in rapeseed, choose the appropriate specification of refining pot for decolorization treatment, so as to remove impurities and sediment.
Refining: The removal of impurities and sediments from oil that do not meet edible standards.
Decolorization filtration separation: The impurities in the oil are screened and filtered through the vacuum filter, the impurities in the oil that do not meet the edible standards are removed, and the oil is separated
• 1. Operating conditions:
A. Canola oil refining equipment should be placed in a dry and ventilated place, and away from heat and fire sources.
B. The temperature should be 0-60℃, and the relative humidity should not exceed 80%.
C. The power consumption of rapeseed oil refining machine shall meet the specified requirements, and the power supply voltage shall not exceed 36 V.
D. Good quality lubricating oil should be selected.
E. The height of the oil surface of the deacidizing pot shall not exceed 5 mm. After deacidizing, rinse the oil surface with distilled water to make it meet the above requirements and clean it.
F. The oil deacidified by rapeseed oil refining equipment should be processed by cold pressing or hot pressing in time (but must be within 3-6 hours), otherwise the quality and decolorization effect of the oil will be affected;
• 2. Process flow
(1) decolorization pot, made of stainless steel.
(2) Washing: Remove the grease from the water and wash it with clean water.
(3) Solvent extraction: After oil and water are prepared in a certain proportion, they are respectively pumped to the vacuum filter for filtration. Two-position four-way ball valve is used to adjust the pressure and control the speed of oil production at the same time, so as to achieve the purpose of fast oil production and constant oil quality.
(4) Deodorization: send the oil into the vacuum filter for dehydration and filtration.
(5) Degumming: the filtered oil is pressed into the degumming cylinder through the cots for dehydration, and the vacuum filter is dried with steam.
(6) Degumming: remove the moisture in the oil and glue after the oil is added to the degumming machine for dehydration treatment, that is, refined oil.
• 3. Precautions:
A. The parts of the rapeseed oil refining equipment are not allowed to be disassembled by hand or with any tools under normal working conditions.
b. Operators should be trained, master the use method and maintenance knowledge of rapeseed oil refining equipment, be familiar with the equipment performance, structure characteristics and correct operation skills, and can only be on duty after passing the assessment.
c. The rapeseed oil refining machine should be inspected frequently for damage. The wear condition of all parts and parts, if found wear should be repaired or replaced in time.
d. It is forbidden to wear gloves and other protective articles when the rapeseed oil refining equipment is working, and it is forbidden to touch the oil pan with hands to prevent burns.
e. The canola oil refining machine must check whether the quality of the oil meets the standard requirements before use.
