The oil yield of edible oil is directly related to the production efficiency of the oil factory. The higher the oil yield, the higher the output. The oil factory will have an advantage in the fierce market competition. So what factors will affect the oil yield of the 6YL-130 screw oil press during the processing of the edible oil production line?
1. 6YL-130 screw oil press equipment
The influence of equipment on the oil yield is mainly in terms of quality, performance, and model configuration. Different types of oil equipment have different processes for extracting oil, the degree of oil extraction is also different, and the quality of the oil is also different. Such as leaching equipment and oil press, the leaching equipment can fully extract the oil in the oil, reduce the residual oil rate of the cake, and increase the oil yield of the oil. However, the quality of the crude oil extracted by the leaching equipment is not as good as that extracted by the oil press, but the cake residual oil rate of the oil press is much higher than that of the leaching equipment. choice.
2. 6YL-130 screw oil press process
Before extracting oil, the oil will go through shelling, crushing, rolling, steaming and frying, etc. These processes are collectively referred to as oil pretreatment. In the pretreatment process, the oil husking rate, the degree of crushing, and whether the oil temperature and moisture are adjusted to the appropriate temperature during steaming and frying all have a certain impact on the oil yield.
We all know that some oil materials such as tea seeds and peanuts need to be shelled first and then processed by crushing, steaming, and frying. The shell of the oil plant does not contain oil, and it will affect the subsequent crushing, steaming and frying, and other processes. Direct pressing will also have a certain impact on the quality of the oil. Therefore, it is necessary to dehull this part of the oil plant first, which can improve the pressing or leaching efficiency and improve the oil quality. Oil quality.
The steaming and frying process can control the temperature and moisture of the oil, destroy the internal cells of the oil, denature the protein, aggregate the oil, reduce the viscosity and surface tension of the oil, and make the oil more fully produced.
3. Production process
After the equipment is installed, the BTMA company manufacturer will arrange for masters to provide equipment operation training for the oil factory staff and standardize the operation of the equipment according to the process flow. Regular inspection, cleaning, and replacement of worn parts are required for the equipment on a daily basis, so as to better maintain the operating state of the equipment, enable it to maintain a normal working state for a long time, and ensure the oil yield of the oil factory.