Introduction to peanut screw oil press
Peanut screw oil press is a special oil press equipment specially developed for pressing peanut oil. Peanut screw oil press has the advantages of simple operation, less labor, small footprint, high efficiency and high oil yield. Can be used as an alternative to processing or factory use, can be used for mustard seed, peanut, soybean, sesame, oil sunflower and other vegetable oil. Peanut screw oil press is actually a screw oil press.
Working principle of Peanut screw oil press:
Peanut screw oil press (screw oil press) operation, processing oil from the hopper into the press chamber. The pressing screw continuously pushes the blank inward to press the blank. Due to the movement of the embryo in the extrusion chamber of the peanut screw press, there is a large friction resistance between the embryo and the extrusion screw, and between the embryo and the extrusion chamber under the condition of high pressure in the extrusion chamber, which can make the friction between the micro-materials of the embryo and cause relative movement.
On the other hand, because the diameter of the root circle of the screw gradually increases and the pitch gradually decreases, when the screw rotates, the thread pushes the blank forward and outward, and the material layer near the thread surface also rotates along with the screw shaft. In this way, each blank particle in the extrusion chamber does not move at the same speed and in the same direction, but there is relative motion between the particles.
The heat generated by friction also meets the necessary heat for the operation of the oil pressing process, which helps to promote the thermal denaturation of the protein in the billet, destroy the colloid, increase the plasticity, and reduce part of the viscosity, so that the oil is easy to precipitate. So as to improve the oil yield of the peanut screw oil press, the oil in the stock is extruded from the gap in the round row.
Technical parameters of 6YL-100 peanut screw oil press:
1. Rotation speed :30-40 RPM
2. Gearbox speed ratio :15/40 * 15/55 = 1:9.78.
3. Matching power :7.5KW
4. Overall size: Length/width/height (mm)
1640/640/1200
5. Single weight: about 480kg
Peanut screw oil press technical advantages:
The disadvantages of traditional oil pressing methods: simple plant, simple equipment, heavy operation, large area, high energy consumption, low oil yield, poor health environment.
Beautiful appearance, reliable performance, simple operation, easy maintenance.
Peanut screw oil press production line flow chart

Installation method of Peanut screw oil press:
(1) Before use, you must read the instructions carefully and be familiar with the performance characteristics and operation methods.
(2) Before starting the machine, a comprehensive inspection must be carried out. All fasteners must not be loosened, the handle must be turned flexibly, and the pulley must be turned by hand. All operating parts should be normal without abnormal noise. Then fill the gearbox with 20 machine oil.
The specific operations are as follows:
Remove the spindle, remove the upper press cage, and grind the outer and inner surfaces of the press screw and screw feeder with emery cloth. Lubricate all lubricating parts and the type and brand of lubricating oil added into the gearbox shall conform to the requirements of the manual. After the round row is polished, the installation must be arranged according to the original position, not dislocation, because the arrangement position and order of the round row have a great relationship with the oil pressure performance. After the round loader is installed, it should be pressed tightly with the pressing nut. The degree of pressure should be that the disc can wriggle when the oil is pressed. After the above treatment, the hydraulic press can be fixed to the foundation with foot bolts. When installing, the motor pulley should be aligned with the pulley of the peanut screw oil press, the position is appropriate, the rotation direction is correct, and the tightness of the transmission belt should be adjusted well.
(3) Loosen the locking nut, turn the adjusting screw counterclockwise, so that the cone of the extruding screw is close to the cone of the cake outlet, and then rotate the adjusting screw clockwise for 2-3 mm, and then tighten the locking nut, ready to start.
(4) Open the door of the electrical box, put the power switch in the box in the off position, that is, the whole machine is powered on.
Peanut screw oil press maintenance:
1. Check the lubrication condition every 50 hours, and the oil cup above the reducer shall not be short of oil. The inner bearing of the screw shaft adjusting screw is injected with butter once per shift from the hole of the adjusting screw. Dry grinding is strictly prohibited.
2. All lubricating parts shall be protected from dust and other impurities. Check the oil quality of the gearbox once a year. If deterioration is found, it should be replaced entirely.
3. When the pressing amount is reduced and the cake or oil is abnormal, the screw shaft should be pulled out, the wear condition of the screw, rod and cake ring should be checked, and the wear parts should be replaced in time.
4. After each shift, the residual cake in the machine should be removed, and the dust and grease on the surface of the machine should be wiped clean.
5. Long-term storage after the end of the production season should be maintained once. Parts of the oil press such as spiral oil press, rod press and pie ring should be removed, washed, oiled and placed in a dry place.