Commercial oil press suitable for small oil mills

For customers who are about to enter the oil press industry, good quality oil press equipment and high oil yield are the key to selection. The oil yield of a commercial oil press is very important to farmers and rapeseed traders.

There are dozens of common oils on the market at present, and the oil yields of these oils are all different. Commercial oil press equipment can be used for pressing these oil crops. Different commercial oil press equipment have different oil yields. The higher the oil yield, the greater the profit, so the oil yield of the oil can also be used as a measure of the user’s selection of oil press equipment.

As a businessman, it is most suitable to open a small oil workshop and choose a screw oil press, which is a hot-selling commercial oil press in the market. The commercial screw oil press produced and exported by BTMA is the most popular. This commercial oil press has high oil yield, low cost and easy operation. Every complete set of commercial oil pressing equipment produced by our company needs to go through multi-level quality inspection. In the specific project design, we will use one or a combination of multiple forms to carry out the overall design according to the needs of customers, product raw materials, and equipment selection. Provide customers with low-cost and high-return planning for the early construction work.

The commercial oil press uses physical mechanical extrusion to extract the oil from the raw materials, and it is divided into cold pressing and hot pressing; Cold pressing does not have these pretreatment processes, and is a physical pressing that controls the temperature within a certain range.

The commercial oil press machine is a new type of fully automatic screw oil press machine consisting of a pressing chamber, a feeding device, a screw assembly, a cake correction mechanism, a gearbox and a motor. The characteristic of the screw oil press is that the press chamber is axially split, the chamber shell is fixed with a dovetail groove single bolt pressing block point, and the chamber shell opening and closing adopts a hinge structure. The screw stroke is a segmented structure, and a labyrinth sealing gasket is used inside, and an anti-leakage screw is set on the side of the screw. This commercial oil press is novel in design and reasonable in structure. It can be used for opening and cleaning and replacing wearing parts during start-up work.

Commercial oil press maintenance and maintenance:
(1) Check the lubrication after every 50 hours of work. The oil cup on the reduction box must not be short of oil. The inner bearing of the screw shaft adjustment screw should be filled with butter once a shift from the adjustment screw hole. Dry grinding is strictly prohibited.
(2) The lubricating parts should prevent the intrusion of dust and other impurities. The quality of the oil in the gearbox should be checked once a year. If it is found to be deteriorated, all the oil should be replaced.
(3) When the amount of pressing decreases and the cake or oil output is abnormal, the screw shaft should be pulled out to check the wear of the screw, bar and cake outlet, and the worn parts should be replaced in time.
(4) After the end of each shift, the residual cake in the machine should be removed, and the dust and grease on the surface of the machine should be wiped clean.
(5) For long-term storage after the end of the production season, a maintenance should be carried out, and the squeezed snails, squeezed bars, and cake rings should be removed, washed and re-oiled, and placed in a dry place.