BTAM-The advantages of using a set of oil pressing equipment
Customers who specialize in the oil pressing industry will ask about the knowledge of refining equipment. Generally, such customers have an understanding of the entire oil production line. As a supplier and manufacturer of oil pressing equipment, we will also give better advice on oil pressing equipment. We will provide our customers with a complete set of oil extraction program, save the cost of oil extraction. Next, I will introduce the advantages of the whole set of oil pressing equipment in detail.
About the processing capacity of oil pressing equipment
Whether it is a large oil mill or a small oil mill, they will tend to ask about refining equipment. Some customers who buy a model 100 oil press will ask questions about what type of refining machine his oil press need to equip with. Manufacturers will feel very difficult whenever they meet such customers. Because the 100 oil press can handle up to 1.5 tons of oil per day. If calculated according to the oil output of peanut oil, it is a little more than half a ton. However, we should know that the minimum output of this supporting refining equipment is more than 1 ton. So the problem between the two is difficult to coordinate, is a contradictory relationship.
 |
 |
The problem of accurate equipment of refining equipment
Some of our customers invest in the refining line at one time, that is, they buy all the equipment at once. Therefore, sometimes the results are not the same as expected. Our advice is to buy refining, be sure to note that if the oil production line is 5 tons, then the maximum output of the refining line is equipped with 2.5 tons. Oil production and refining production are generally 1/2 of the amount, or less, because we cannot press the whole 1.1 ratio of raw materials into oil. This is something we should focus on, especially for beginners. Customers who are new to the industry must find out if their situation is suitable for the refining line.
 |
 |
Different oils are treated differently
For example, peanut oil can directly become a national grade oil as long as it can decolorize and deodorize, while rapeseed must go through a dephosphorization and degreasing. Cottonseed oil needs to be mildewed. Corn oil only requires decolorization and desugar as well as degumming. Many customers believe that the better the refining line, the more steps it takes to process the oil. This is wrong perception. As a manufacturer, we will make it clear to customers to avoid them spending more money. Different oil has different processing methods, only need to process according to the principle, not the more complex refining equipment is better.
In short, we must understand their own purpose in the purchase of a full set of oil extraction equipment and refining equipment, only suitable for their own refining line equipment is the most important, if you have more want to know about the whole set of oil extraction production line knowledge, you can contact me. Our company will give you the best service.
